How do I reconnect my NETGEAR WiFi range extender to my home network?

Reconnecting NETGEAR WiFi range extender with home network is as easy as setting up new NETGEAR WiFi range extender.

In this article we will discuss various steps involved in reconnecting NETGEAR WiFi range extender to home network in detail.

You can reconnect NETGEAR WiFi range extender to home network by following any one mode among

  1. Wired connection
  2. WiFi connection

The only difference between them will be that, in first case you will be required to connect the extender and a device through Ethernet cable to reconnect your NETGEAR WiFi range extender whereas in second case you will require WiFi signal to reconnect your NETGEAR WiFi range extender to home network.

We will discuss steps involved in both methods in great detail ahead.

But before that let’s understand what is NETGEAR WiFi range extender and why you need to connect or either reconnect your NETGEAR WiFi range extender with home network.

What is NETGEAR WiFi range extender?

As the name suggest, extenders are devices which are used to extend the coverage range of existing network.

So if you are having issues with respect to network coverage in your network that means if in your network there exists some spots where signal from your network router is not approaching properly then best solution for you is to go for NETGEAR WiFi range extender.

(These spots where appropriate network signal is not received are known as dead spots or blind spots.)

They work as amplifier. Thus they are capable to send the amplified signals that are coming from your network router to each far end of your network.

Because of this increased signal strength, signal becomes approachable to each far end of your network and this issue of dead spots get eliminated.

This is the prime function of NETGEAR WiFi range extenders.

Now after understanding what is NETGEAR WiFi range extender now let’s move toward our second question that is why do we need to connect NETGEAR extender with home network.

Why to reconnect NETGEAR WiFi range extender to home network?

As we had already discussed that NETGEAR WiFi range extender is tasked to extend your existing network.

Thus it is of prime importance to firstly connect it with your existing network.

This can be done only when you connect your NETGEAR WiFi range extender with home router.

Thus this connection is required.

Now after understanding these nitty-gritties let’s move toward our prime topic of discussion that is how to connect extender with home network.

As stated above, you are provided with two methods to reconnect your NETGEAR extender with home network.

Let’s discuss in great details, various steps involved in them.

  1. Wired connection:-In this method you can reconnect your NETGEAR WiFi range extender with home network with the help of wired connection, that means via Ethernet cable.

Various steps involved in same are as listed below:

Step 1

Establish the link between your NETGEAR WiFi range extender and a device through which you can install extender. (In this case we are taking this device as computer). You have to use Ethernet cable to connect them.

Step 2

Then launch a web browser. You can use any web browser of your choice

Step 3

Type http://www.mywifiext.net in the address bar of the browser.

Step 4

Now a login page will opened up. Here you are required to enter login credentials.

By default these credentials are:

Username: admin

Password:- password

Step 5

Then click on Log in

Step 6

Now go to Setup and under that click on Wireless Settings

Step 7

Here under Security options, you are required to verify password. This password should have to be same as your home router’s password.

If in case it does not match, then you are required to change it to router password.

Step 8

Once done with it click on Apply

Step 9

Now reconnect your WiFi devices with the extender network.

By following these simple steps you had successfully reconnected NETGEAR WiFi range extender with your home network.

  • WiFi connection:- Second method through which you can reconnect your NETGEAR extender with home network is through WiFi connection.

In this you do not need any Ethernet cable. In this case WiFi signal will serve the purpose.

Now comes steps to reconnect NETGEAR WiFi range extender via WiFi connection. These are as listed below:

Step 1

Firstly reset your NETGEAR extender. For this you are required to press as well as hold Factory Reset button present on your extender, for approximately 7 seconds.

Step 2

Then open up WiFi menu in any of your network device such as computer or laptop. Here connect with your NETGEAR extender network by selecting WiFi network named as NETGEAR_EXT

Step 3

Once your device gets connected with NETGEAR extender’s network, open up a web browser.

Step 4

Here type http://www.mywifiext.net in the address bar.

Step 5

This will display a login page.

Here enter the credentials to get logged into.

Ensure the credentials that you enter should have to be same as you had assigned during NETGEAR extender setup and if in case you had not changed the credentials then enter default credentials which are:

Username: admin

Password: password

Step 6

Here make desired changes and your extender is ready to be used.

Step 7

Reconnect WiFi devices present in your network with NETGEAR extender’s network.

In this way you successfully reconnect NETGEAR WiFi range extender to your home network via WPS method.

These were simple steps through which you can easily reconnect your NETGEAR WiFi range extender with your home network either through WiFi or through Ethernet cable.

Hope all information provided in this article will serve its purpose and you can easily get reconnected your NETGEAR WiFi range extender to home network. Thus reconnect your extender with home network and enjoy uninterrupted network connectivity throughout your network.

Spread the love